Automatic Reciprocating Cleaning Machine

1: Workpiece Name: support and shell

2: The size of the basket is 1200 × 100 mm, and the maximum passing height is 500 mm

One large workpiece can be placed and two small ones can be placed.

3: Production rhythm: 10-15min / frame (adjustable)

4: Main cleaning: oil, scrap iron, special jet nozzle, high pressure cleaning for inner cavity.

5: Working mode: reciprocating cleaning, workpiece placed in the basket, rotating surface cleaning

6: Workpiece trolley load: 500kg

7: Cleaning requirements: mainly clean the inner and outer surfaces of the workpiece, and visually check that there is no dirt or impurity

8: Power supply: 380V ± 10% 50 Hz

9: Cleaning medium: the proportion of water + solvent metal cleaning agent is 3-5%, and the pH value is 9

10: Gas source: compressed air, working pressure: 0.4-0.6mpa
According to the requirements of cleaning process and the structural characteristics of cleaning parts, the equipment adopts the method of multi process (cleaning, rinsing, blowing water) cleaning. Transportation mode: reciprocating structure.

This equipment is a reciprocating cleaning machine, which is suitable for cleaning mechanical parts. The workpiece is sent to the cleaning area (rinsing and drying area) by the conveying trolley, and the cleaning liquid with certain pressure and temperature is used to spray evenly to the surface of the workpiece. Meanwhile, the workpiece rotates around the axis under the driving of the workbench for rotary cleaning (the cleaning time is adjustable). Then carry out rotary rinsing (the rinsing time can be adjusted, the rinsing box is filled with rust inhibitor, and the drain valve is also changed by the cylinder when the cleaning and rinsing are changed). After cleaning, manually brush the screw hole and dry the workpiece. Finally, manual drying is carried out, the whole program is controlled by Mitsubishi PLC in Japan.